+ print
+ close


Plastic check valve assemblies using USP Class VI plastics and valves designed for strength and performance to meet the functioning requirements in infusion systems, IV lines, syringes, diagnostic equipment and other uses.

Product Details

Materials of Construction:

Filter Material: Silicone Rubber Medium
Housing Material: MABS

Biological Safety: USP Class VI Materials
Sterilization Compatibility: Gamma Radiation, EtO


Type: Combination Fittings
Inlet: 3mm Coaxial Coaxial
Outlet: Male luer lock Male Luer Lock


Overall Dimensions: 0.819" x 0.472" major diameter
Valve Static Position: Normally Closed
Position Sensitivity: None
IP: Patent Pending

Performance Data:

Air back check: </= 4.0 cc/min @ 6" H2O Head Height
Back flow: Zero
Minimum flow rate: >/= 120 ml/min @ 36" of H20 Head Height
Maximum Flow Rate: >/= 300 mL/min @ 36" of H2O Head Height
Valve opening pressure: 50-100mm Wg. (2-4 in.)
Pressure rating: 80 psid
Usability: Disposable


Standard Pack: 12,000 parts/carton (bulk, non-sterile)

Specifications are for pre-sterilized products and are subject to change without notice. Results in specific applications may vary. Filtertek recommends that end user confirm fitness in specific applications.

Product Drawings

Performance Charts

There are no performance charts for this product.


Product Warranty

Filtertek takes the quality and performance of our products very seriously. Every effort is made to provide our customers with a product of low variability which consistently meets specification in every respect. Filtertek strives to continually improve the quality of our products and cannot always ensure that our literature and published data is up-to-date. Please contact your Filtertek account manager to discuss your application and a suitable product in detail before making a purchase.

Our specifications are for pre-sterilized products and are subject to change without notice. Customers are encouraged to fully test any product in its end use application to ensure suitability.

Filtertek Inc. products are warranted against defects in materials and workmanship for a period of 90 days after shipment. Filtertek Inc. will replace or refund the invoice price for any item that proves to be defective during this time period. These products are not warranted, nor does Filtertek Inc. assume liability for misuse. No other warranty or representation is implied or expressed by Filtertek Inc. for its products with respect to merchantability, fitness for a particular purpose or any other matter. Filtertek Inc. shall not under any circumstances be liable for any incidental, consequential, or compensatory damage arising from the use of, or in conjunction with its products. The maximum liability which can be assumed by Filtertek Inc. for breach of warranty shall be the invoice price of the product.

Technical Literature

Technical Literature

There is no technical literature for this product.

Related Products

Related Products

There are no related products.